MIG/MAG torch MPP PRO for welding robots
Push-pull torch for standard aluminum welding and steel welding
You weld aluminum or steel and don't need complex processes? It is important that you can bridge even long wire feed distances easily and safely? Then you are on the safe side with the new liquid cooled push-pull torch MPP PRO from ABICOR BINZEL.
![](/uploads/Content/Germany/Pictures/Images_ROBO/MPP_PRO/MPP_PRO_title_2.webp)
![](/uploads/Content/Germany/Pictures/Images_ROBO/MPP_Pro/MPP_PRO_title_2.webp)
All information at a glance
Properties of the MPP PRO
The MPP PRO is a robotic welding torch with a conventional push-pull drive for standard aluminum and steel welding applications. The modern brushless motor technology increases the service life of the push-pull drive motor. In combination with the two wire feed rollers, wire feeding is reliable even over long distances and guarantees consistent welding processes.
The drive is compatible with most standard robot power sources. You can achieve outstanding team performance with power sources iROB® 301, 401 and 501.
Included in the scope of delivery:
- Cable assembly in required length
- MPP PRO welding torch
![](/uploads/Content/Germany/Pictures/Images_ROBO/MPP_PRO/MPP_PRO_Detail.webp)
![](/uploads/Content/Germany/Pictures/Images_ROBO/MPP_Pro/MPP_PRO_Detail.webp)
Properties overview:
- Powerful, reliable wire feed at the highest level
- Ideal for standard aluminum welding applications
- Ideal for steel welding applications where long wire feed distances need to be bridged
- Suitable for hollow shaft robots (TA = through-arm), but also for standard industrial robots with externally guided (without coupling) cable assembly (OA = over-arm)
- Suitable for torch mount and iCAT and iCAT mini switch-off protection for TA robots, CAT3 PRO for OA robots
- For cable assembly lengths of 3, 4 and 5 m
- Basic torch technology corresponds to the proven ABIROB® W
- Brushless motor technology with 2 driven wire feed rollers in the wire feed unit
- All power connection plugs can be fitted on request (Euro-ZA, Lincoln, Panasonic etc.)
Areas of application
Aluminum welding continues to increase, particularly in lightweight vehicle construction. For this reason, the MPP PRO is also the ideal push-pull torch for standard aluminum applications in automotive production. Especially in e-mobility, where MIG welding and MAG welding are used in addition to laser welding. The MPP PRO push-pull torch is not suitable for highly developed processes such as kinetic or CMT – for which a suitable power source is also required.
Classical areas of application
- Automotive industry
- Commercial vehicle construction
- Rail vehicle construction
- Yellow goods
- General construction
The liquid cooled MPP PRO robotic welding torches are particularly suitable for the following applications:
- Aluminum components in rail vehicle construction, bus vehicle construction
- Battery boxes, e. g. in e-mobility
- Steel components that require long wire feed sections, such as heavy machinery constructions, earthmoving machinery, trucks and general vehicle construction
Technical data according to EN 60974-7:
Performance data MPP PRO:
Supply voltage drive motor: | 36 V BLDC |
Ø wire feed roll: | 20 mm 2 driven wire feed rolls |
Suitable wires: | steel/AI materials 0.8 – 1.6 mm |
Wire feed speed: | 1 – 22 m/min |
Weight: | approx. 2.9 kg (without cable assembly and torch) |
Can be used with all common industrial welding robots.
Performance data torch:
Type: | ABIROB® W 300 | ABIROB® W 400 | ABIROB® W 500 | ABIROB® W 600 |
Type of cooling: | liquid cooled | liquid cooled | liquid cooled | liquid cooled |
Rating | ||||
CO2: | 330 A | 470 A | 550 A | 600 A |
Mixed gases M21*: | 300 A | 400 A | 500 A | 550 A |
Duty cycle (%): | 100 | 100 | 100 | 100 |
Wire-Ø (mm): | 0.8 - 1.2 | 0.8 - 1.6 | 1.0 - 1.6 |
0.8 - 1.6 |
Torch geometries: | 22°/45° | 0°/ 22° / 35°/ 45° | 0°/ 22° / 35°/ 45° | 0°/ 22° / 35°/ 45° |
* Mixed gases M21 according to DIN EN ISO 14175
All liquid cooled welding torches from the ABIROB® W torch series can be used with the MPP PRO. Special geometries are also available on request. Please contact us.