MIG/MAG Welding Torch Push-Pull PP
The "Long-Distance Torch"
For the use in shipyards, by manufacturers of large and small containers, in vehicle and wagon construction, especially for welding aluminium, use of thinner wires and with long cable assemblies.
Arguments speaking for themselves:
- Constant and trouble-free feeding
- Air cooled from 220 to 300 A
- Liquid cooled from 270 to 400 A
- Optimum torch cooling - high endurance
- Time-saving torch neck replacement thanks to ABICOR BINZEL's central plug system
ABICOR BINZEL-Welding Torches incorporate the high quality and technology needed for trouble-free performance whatever the welding job. All the torches have been thought through down to the last detail and guarantee exact and comfortable work.
MIG/MAG Welding torch Push-Pull PP, air cooled
Technical data according to EN 60 974-7:
| Type: | Push-Pull PP 26 D |
Push-Pull PP 36 D |
| Rating | ||
| CO2: | 230 A | 300 A |
| Mixed gases M21*: | 200 A | 270 A |
| DC (%): | 35 | 60 |
| Wire-Ø (mm): | 0.8 - 1.2 | 0.8 - 1.2 |
*according to DIN EN ISO 14175
Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%.
MIG/MAG Welding torch Push-Pull PP, liquid cooled
Technical data according to EN 60 974-7:
| Type: | Push-Pull PP 401 D |
| Rating | |
| CO2: | 400 A |
| Mixed gases M21*: | 350 A |
| DC (%): | 100 |
| Wire-Ø (mm): | 0.8 - 1.2 |
*according to DIN EN ISO 14175
Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%. Recommended cooling capacity of water recirculator approx. 800 W. To protect cable assembly components from excessive heat build up we recommend a post welding cooling cycle of at least four minutes.